Select Your Vehicle 1   | Category 2   | Year 3   | Make 4   | Model 5   | Trim 6   | Location
Didn't find your vehicle? Use the bulb finder system to get the bulb size.

H7 Canbus Adapter Anti-Flicker Warning Canceler for H7 LED Bulb

H7 Canbus Adapter Anti-Flicker Warning Canceler for H7 LED Bulb





Please choose Size:

H7 Canbus Adapter Anti-Flicker Warning Canceler for H7 LED Bulb

  • Visa
  • Mastercard
  • JCB
  • Maestro
  • American Express
  • Diners Club
  • Discover
  • PayPal

Guaranteed safe & secure checkout

2 Years Warranty

  • Detail
  • Review

Check other Canbus Decoders/ Resistor

Why need to buy an h7 decoder?

H7 CANBUS Decoder LED Headlights Fog Lights Anti Flickering Error Fix.

Owing to the circuit of the original headlights controlled by the car computer, the working principle and current of LED headlights are different from the original halogen lamps. The driving computer may not be able to detect the feedback signal of the LED headlights, which causes the dashboard to display error messages. Therefore, you must install the LED decoders to resolve all the fault alarms caused by modifying the LED headlights.

When will you need an h7 CANbus decoder?

1. Headlights failure message on the dashboard;

2. High beam failure message on the dashboard;

3.H7 LED headlights hyper-flashing or flickering;

4. The engine stops working when turning on the H7 LED bulbs;

5. The H7 LED Headlights to stop working When the engine is ignited;

6.H7 LED headlights automatically turn off after lighting up for a few minutes.

7. Radio interference and buzzes.

Advantages of the AUXITO H7 LED bulb decoder:

✔ EXCELLENT COMPATIBILITY: Fits for universal H7 led headlight/Fog-light bulbs. Compatible with Controller Area Network (CANBUS) systems or electrical system vehicles.Such as 2009+ Dodge, Ram, Ford, GMC Chrysler, Chevrolet, Hyundai, Kia, and More.

✔ PLUG-N-PLAY: Easy Installation. All-in-One Design. Plug and Play Setup for LED Headlight Conversion Kits. Average Installation time: 5-10 minutes;

✔ Worry-free guarantee: With our car decoder, 95% of the problems can be solved after installing led headlights. Please note: Different cars have different situations. We cannot guarantee a 100% effective solution to all problems.

How to install the H7 LED Headlight CANbus Decoders?

CAN-BUS H7 LED Decoder Installation for Cars' Headlight/Fog Light


Working voltage: DC 9-16V

Power compensation: 6.5W-7.5W

Working temperature: -40 ° C ~ +125 ° C

Anti-reverse protection mode: input voltage positive isolation, output voltage negative sharing

Package Includes:

2x H7 LED Headlight Canbus Decoders

Customer Reviews

Based on 67 reviews
Vijitha Lekamlage
What is your vehicle's year, make and model : 2011 Honda crz

It’s working perfect

Charles Hagler
What is your vehicle's year, make and model : 2017 Ford F150
Led headlights

They work great headlights hadn't flickerd one time yet

John Manko
What is your vehicle's year, make and model : 2011 Ford Escape Limited
Load Resistor Fixed the Flicker

This load resistor fixed the headlight flicker on my 2011 Ford Escape. Used Auxito Z1 9008 H13 LED's. The load resistor is a must. See the difference in the yellow vs white headlights below.

Larry Maxwell
Work great

Work much better than store bought stock headlights. On my can it matters which wire goes we're. It be nice if the instructions indicated this as they didn't work I switched wires and all good

Bobby Crawford

9006/HB4 Canbus Adapter Anti-Flicker Warning Canceler for LED Headlight

You recently viewed

Clear recently viewed