H8/H9/H11 Fog Light Bulbs

The AUXITO H8 H11 LED fog light bulb uses a 2-sided CSP chip, which is in the same position as the halogen lamp filament, to produce a perfect lighting effect for your car.
Each set of 3400LM, 6500K xenon white light, extremely bright. 360-degree illumination, no black spots. Real mini size, easy to install.
All aviation aluminum lamp body, fanless design, hollow groove heat sink, life extension to 30,000 hours. Weatherproof can work well on rainy, snowy, and foggy days, allowing you to see farther and wider in bad weather.

1157 Front Turn Signal Lights for 2018-2019 Kona

• Built-in Load Resistors &IC Driver. Canbus error-free, plug-and-play. Wide Voltage & constant current.
• Standard 1157/2057 base, it almost the same size as halogen bulbs. Super bright LED interior light, +320% BRIGHTER THAN STOCK BULB.
• Full aluminum housing with projection lens for maximum light output and better heat distribution, built-in constant current IC for longer life span & low power consumption.

1156 Rear Turn Signal Lights for 2018-2019 Kona

• Canbus ready: The 1156 BA15S led turn signal light bulbs built-in upgraded IC driver, anti hyper flash, and error-free for 90% vehicles. Do not need load resistors in addition. Plug and play like original bulbs. 25W per bulb, amber yellow light. For some sensitive vehicles, load resistors may be needed.
• High brightness: AUXITO 1156 BA15S led bulb uses 24 pcs 3020 LED chips for 360° illumination. 300% brighter than a halogen bulb. The light source is closer to the halogen bulbs', good beam pattern.
• Good cooling system: Whole aviation aluminum lamp body and hollow out body design give the LED turn signal light efficient heat dissipation. Ensure the secure temperature range and 40,000 hours of life span.

Note: As these LED turn signal bulbs are not compatible with the OEM trip-computer inspect the system on 2020-2021 Hyundai Kona, they will hyper flash or have an error code issue. So the whole package for 2020 Kona does NOT include the front & rear turn signal bulbs.

1156 Back-Up Light Bulb

• Scientific LED Distribution: Combination of 4014 & 3030 LED chips. 7W High output to deliver 1400lumnes per bulb. Ensure sufficient illumination brightness and distance for safer backing up
• CANBUS error-free type: for most vehicles, just plug and play, easy installation. Yet for some vehicles, extra load resistors or flash relays may be required to avoid the error code or fast blinkering issue
• Higher Stability: fast cooling lamp body design. And built-in constant current IC driver, instant-on with maximum light efficiency. Ensure stable and longer working life
• Application: Back up reverse lights, brake lights, tail lights, parking lights, daytime running lights, side marker lights, etc. Load resistor or flash relay might be needed to prevent the hyper flash when replacing turn signal lights

T10 License Plate Light Bulbs/ 194 Map Light Bulbs

• Extraordinary quality, low power consumption, eco-friendly.
• 1pcs 3030SMD + 12pcs 4014SMD， for 360 degree illumination, no dark spot.
• Universal T10/194 connector. Improved plug, sit tightly into the original sockets.
• Built-in intelligent IC driver. Ensures constant current& CANbus error-free for 95%+ vehicles.
• Built-in intelligent IC can adjust the temperature according to the environment automatically.
• Hollow inner body design ensures fast heat dissipation.
• Aviation aluminum material for a longer lifespan.

If you need the other LED bulbs, please check the model user manual or contact us by mail at support@auxito.com

Looking for something else? Head to our homepage