Select Your Vehicle 1   | Category 2   | Year 3   | Make 4   | Model 5   | Sub Model 6   | Body Type 7   | Location 8   | Qualifier
Didn't find your vehicle? Use the bulb finder system to get the bulb size.

AUXITO 7443 switchback led bulbs White/Amber Turn Signal Lights, 7444 LED Bulbs with Projector

AUXITO 7443 switchback led bulbs White/Amber Turn Signal Lights, 7444 LED Bulbs with Projector

$52.00
$32.99
Save $19.01

10%

OFF

Code: AUXITOLED

Color
  • Visa
  • Mastercard
  • JCB
  • Maestro
  • American Express
  • Diners Club
  • Discover
  • PayPal

Guaranteed safe & secure checkout

2 Years Warranty

  • Detail
  • Review

Are you tired of amber as a constant DRL when the low beams are on, especially when your front lighting is all cool white LEDs, sorta ruining the all-white look you're after when cruising. But since the turn signals and parking light are integrated with dual filament bulbs, you can't replace it with a white LED bulb because only the amber signal to comply with the law.

Truck enthusiasts often pay attention to each fine detail as they modify their vehicles. With switchback LED lights, your truck can utilize a unique feature that contributes to road safety.

ABOUT AUXITO SWITCHBACK TURN SIGNALS/PARKING LIGHT

Dual color feature makes your road driving safer

These AUXITO Switchback turn signals with a dual color function, they will light up with white color as the low-filament running light/parking light, and switch to bright amber any time when you hit the turn signal.

The "amber-off-amber-off" AUXITO LED Switchback bulb flashing pattern is different from the "amber-white-amber-white" of other Switchback turn signals on the market and makes your vehicle more noticeable to oncoming drivers. When you're going straight, the Switchback LEDs will switch to white to keep your front lighting consistent!

High brightness

Each bulb has 16pcs high power 3030 led chips for perfect beam pattern, high light output but low consumption

HD glass projector provides a stronger light penetration for better lighting experience.

Avoid signal interference

Wide-range voltage and intelligent constant current IC driver avoid digital and VHF radio signal interference.

High Quality

Heat-resistant Aluminum circuit board for better transfer efficiency. Solid alloy body for better heat dissipation and longer lifespan

Plug and Play

No polarity design,and compatible with both standard and CK sockets. Fit directly into multiple sockets such as: 992, 7440, 7440A, 7440AL, 7440NA, , 7440LL, 7440ST, 7440NA, 7441, 7443, 7443NAK, 7443LL, 7444, 7444NA, 7444NAK, , W21W, WY21W etc

Specification

  • Voltage: DC 9-18V
  • Current: 0.68A
  • LED Type: 3030SMD
  • Color: Amber Yellow/White
  • Socket Type: Compatible with both CK and US standard sockets

*IMPORTANT NOTE

  1. These will only work for dual function lights that have both the parking/DRL and turn signal function in one bulb

  2. The 50w 6ohm load resistor or flasher relay may be needed to prevent the hyper flash or the bulb does not blink for vehicles with built-in canbus system

  3. Amazon filter system may not 100% correct, pls double check your owner's manual or original bulb size to confirm whether it fits your car before purchasing

Customer Reviews

Based on 40 reviews
83%
(33)
13%
(5)
3%
(1)
0%
(0)
3%
(1)
M
M.B.
What is your vehicle's year, make and model : 2020 Ford Ranger
Resistors Install

Wanted to add pictures of the resistors I installed and mentioned in the last review. Mounting was a little difficult. Installing the splices were easy. To install, I bought some #4 x 3/8 sheets metal screws and a 1/16 drill bit.
Now everything functions perfectly.

M
Mark Brown
What is your vehicle's year, make and model : 2020 Ford Ranger
Excellent Upgrade

Installed these Led and they are fantastic. The only issue was my instrument panel blinkers were hyper blinking. The light have Canbus so they were not hyper blinking but I want to correct for the hyper blinking on the instrument panel so sent a message to customer support and address the problem and thy sent me the Resistors i installed and now everything is great. Highly recommend these switchbacks. If you need to install the resistors, make sure you mount them securely because they can melt plastic. I went to Home Depot and bought some #4 X 3/8 sheet metal screws and a 1/16 drill bit for mounting. Also use a multimeter and check your wiring to verify before using the splices provided.

B
Benjamin Orgain
What is your vehicle's year, make and model : 2016 Ford F150
Switch back led bulbs

The bulbs work great but I have the hyper flash inside on the turn signal indicator.

I
Ian Masterson

AUXITO 7443 switchback led bulbs White/Amber Turn Signal Lights, 7444 LED Bulbs with Projector

T
Troy Ferreira
What is your vehicle's year, make and model : 2016 Ford F-150
Fantastic Lights

The lights look great and function perfectly!

You recently viewed

Clear recently viewed