✔ Since the original headlights‘ circuit is controlled by the car driving computer, the working principle and current of LED headlights are different from the original halogen lamps. The driving computer may not be able to detect the feedback signal of the LED headlights, which causes the dashboard to display error messages. Therefore, you must install the LED decoders to resolve all the fault alarms caused by modifying the LED headlights.
✔ Canbus decoders can solve the following problems:1. Headlights failure message on the dashboard;2.High beam failure message on the dashboard;3.LED headlights hyper-flashing or flickering;4. The engine stops working when turning on the LED headlights;5. The LED Headlights stop working When the engine is ignited;6.LED headlights automatically turn off after lighting up for a few minutes.7.Radio interference and buzzes.
✔ EXCELLENT COMPATIBILITY: Fits for universal H11/H8/H9 led headlight/Fog-light bulbs. Compatible with Controller Area Network (CANBUS) systems or electrical system vehicles.Such as 2009+ Dodge, Ram, Ford, GMC Chrysler, Chevrolet, Hyundai, Kia, and More.
✔ PLUG-N-PLAY: Easy Installation. All-in-One Design. Plug and Play Setup for LED Headlight Conversion Kits. Average Installation time: 5-10 minutes;
✔ Worry-free guarantee: With our car decoder, it can solve 95% of the problems after installing led headlights. Please note: Different cars have different situations. We cannot guarantee a 100% effective solution to all problems.

Since the original headlights‘ circuit is controlled by the car driving computer, the working principle and current of LED headlights are different from the original halogen lamps. The driving computer may not be able to detect the feedback signal of the LED headlights, which causes the dashboard to display error messages. Therefore, you must install the LED decoders to resolve all the fault alarms caused by modifying the LED headlights.

Canbus decoders can solve the following problems:

• 1.Headlights failure message on the dashboard;
• 2.High beam failure message on the dashboard;
• 3.LED headlights hyper-flashing or flickering;
• 4.The engine stops working when turning on the LED headlights;
• 5.The LED Headlights stops working When the engine is ignited;
• 6.LED headlights automatically turn off after lighting up for few minutes.
• 7.Radio interference and buzzes.

Specification:

• Working voltage: DC 9-16V
• Power compensation: 6.5W-7.5W
• Working temperature: -40 ° C ~ +125 ° C
• Anti-reverse protection mode: input voltage positive isolation, output voltage negative sharing

Package Includes:

• 2x H11/H8/H9 LED Headlights Canbus Decoders

FAQ

Q: Why is my H11 LED bulb flickering after 2 years of use? And the CANbus decoder I installed doesn't work.

A: A car's headlight bulb can go bad once it has completed its lifecycle, one result of which is flickering, and similarly, an LED bulb may go bad and flicker when it is physically damaged. At this point a CANbus decoder will not solve the problem, our recommendation is to replace the H11 LED headlight bulb.

Q: Are these H11 H8 CANbus decoders difficult to install?

A: No. These CANbus decoders are plug-and-play and require no wiring harness modifications, so you can solve your H11 headlight bulb decoding problem in minutes.