Y19 Series 9005/HB3 LED Headlight Bulbs
Y19 Series 9005/HB3 LED Headlight Bulbs
2-Year Warranty with Pay with Ease
Choose your year, make, and model to browse products with exact fitment faster.
Currently Shopping For
Previously Saved
2-Year Warranty with Pay with Ease
If the car light output is important to you, then the Y19 series of 9005 LED bulbs are a great choice. With a 700% brighter output than halogen bulbs, it's preferred for off-road headlight lighting.

AUXITO 9005/HB3 led headlight bulbs designed with 24 pcs highly bright CSP chips, 120W, 24,000LM per pair, are 700% brighter than stock bulbs. 6500K cold white improves nighttime visibility and helps you see more clearly. A huge upgrade for halogen low beam or high beam.
![]() |
![]() |
The 0.03-inch ultra-thin base board makes AUXITO 9005 LED bulb closer to the light-emitting area of the halogen bulb, ensuring 360° lighting without black spots. No glare to oncoming vehicles and drivers. The light is more focused on the ground, providing you with a more comfortable and safer driving environment

Almost 1:1 mini-sized design as halogen bulbs, no radio interference, and non-polarity socket, perfectly fit into the headlight housing and factory plug without any modification. Installation takes less than 10 minutes, just plug and play

The closer the size and position of the LED chips to the filament of the halogen bulb, the better the beam pattern. AUXITO takes this philosophy into the design of the 9005 LED bulbs, so the bulbs can produce the best beam pattern without binding others. The 9005 bulbs centralized full beams, allowing you clearly see deer off to the side, avoid repair work and accident, take it easy through rural areas, deserted highways
9005 HB3 LED bulbs are designed with full body aluminum material, double copper tube, and copper baseboard for fast cooling, built-in 12,000RPM high-speed silent cooling fan effectively pulls the heat away from the LED chips, ensuring a lifespan of up to 50,000 hours

Built-in intelligent IC driver and almost identical to the power of halogen bulb for optimized compatibility. Work well with 99% of vehicles’ systems. No Errors and no Flickering. But some sensitive models may require a CANbus decoder
![]() |
![]() |
In this video, @Spirit'ed Wrenchers upgrading the High & Low Beam Headlights in their families' 2020 Kia Sorento and they walk through the low beam and high beam bulb replacement steps. These LED bulbs will work better whether you are upgrading to LED or simply replacing a blown bulb.
And they emphasize the importance of ensuring an even beam that doesn't cause glare by properly reinstalling the bulb. To ensure safe driving, it's best to test all the headlights and check the beam alignment on a wall or your garage door.
Q: How to install Y19 series 9005 LED bulbs correctly?
A: Y19 Series 9005 bulbs are as plug and play as the original halogen lamps, i.e. how you install a halogen lamp you can install an LED bulb in the same way. It is important to note that when installing the bulb the wick is oriented in the 3-9 o'clock direction for optimal beam.
Q: Does the Y19 Series 9005 LED headlight bulb have an adjustable collar?
A: No, they do not
Q: Are these lights suitable for off-roading?
A: These Y19 series 9005 headlights with a brightness of 24,000 LM/pair, are specifically designed to illuminate your off-road adventures. Its powerful illumination ensures that you can see the road ahead clearly during off-roading and avoid colliding with obscured obstacles or animals, and it is one of the brightest headlights on the market.
These headlights improved not only the aesthetics of my car but the overall safety in driving at night! I drive dark country roads early in the mornings and these have helped me spot animals, road debris etc far ahead of me! 100% would buy again
Number 1: the bulb you sent me with the wire, the Y19, are extreme difficult to install due to the connector. Your procedures and the Toyota procedure has you re-install the dust and moisture cap back on to protect the internals of the light housing from debris. The problems with that is two fold. First, to install the dust cap back you have to tuck the connection inside the light housing and that in itself was painful and time consuming. Definitely not a plug and play. Number 2: the LED unit you sent produces a lot of heat! So much heat that AUXITO was smart enough to install a heat sink and a cooling fan. However, once you put the dust cap back on you’ve effectively turned the internals of the light housing into a convection oven, cooking the electrical system, reason why, I believe, the bulbs have failed on the first night used. The solution to that is two fold: leave the connector outside the housing for ease of connection hopping the wires don’t chafe and eventually fail, and leave the dust cap off for cooling.
Number 3: The gloves. Although a nice touch, once you put them on and start working, they snag on anything sharp making the installation of the bulb that much more difficult. A rugged, thick latex would make a better solution, or no gloves at all.
I had to reinstall the HIDs back so my wife and daughter can see while driving at night. I was in the car with her last night and you couldn’t see anything creating a potential hazardous condition if the rest of the low beam bulb on the passenger side failed. The bulbs literally lasted minutes on the first drive in the dark. That being said, if you choose to send me the same bulb again I’ll do what I wrote you above. If you choose the send the other model for the same car without the external wire, I’ll install that but I still won’t install the dust cap for the same reasons mentioned above; too much heat.
👍👍👍👍👍👍
Now i can see way more with this lights fit perfectly and as described i do recommend to buy i have them in all my vehicles.
Super bright but excellent spread as well. Just like old HID but so much brighter. Fantastic product
Upgraded for 2025 | 170W and 32000LM for extreme brightness and superior road illumination. Wide 9-30V Voltage Range | Ensures stable output and...
View full details⚡ 150W power and 24,000 LM for superior nighttime visibility. 📏 0.039-inch chip spacing achieves a perfect halogen-like beam pattern. ...
View full detailsDual Color for Any Weather One-second quick switch between 6500K cool white for maximum nighttime visibility and 3000K golden yel...
View full detailsCheck other Canbus Decoders/ Resistor Size: 9005/HB3 Decoder Suitable for solving decoding problems of 9005、H10、9006、9012 LED bulbs. ✔Since the ...
View full details600% Brighter Than Halogen With a luminous flux of up to 20,000 lumens, 100W per set, and 6000K color temperature, AUXITO upgraded 9005 ...
View full detailsGet lighting tips, product launches & exclusive offers straight to your inbox.
Get lighting tips, product launches & exclusive offers straight to your inbox.
Follow us on social media to stay updated on the latest news and promotions.
Super simple and fast install! Bright updated lighting that does not blind other motorists. Packaging is great. Shipping took a couple weeks.
Works great for my Acura mdx
best light upgrade
This is my 3d purchase from Auxito and im more than satisfied with the product. Also the help center is exelent.
AUXITO H11 H8 H9 H16 LED Fog Light Bulb Fanless, 3000k Golden Yellow 26W per set, CSP LED Chips



