Select Your Vehicle 1   | Category 2   | Year 3   | Make 4   | Model 5   | Trim 6   | Location
Didn't find your vehicle? Use the bulb finder system to get the bulb size.

AUXITO 3156/3157 Red Led Bulb Brake Tail Light, 3056 3057 14-SMD 3030 Chipsets LED Bulbs

AUXITO 3156/3157 Red Led Bulb Brake Tail Light, 3056 3057 14-SMD 3030 Chipsets LED Bulbs

$50.00
$30.99
Save $19.01

10%

OFF

Code: AUXITOLED

AUXITO 3156/3157 Red Led Bulb Brake Tail Light, 3056 3057 14-SMD 3030 Chipsets LED Bulbs

  • Visa
  • Mastercard
  • JCB
  • Maestro
  • American Express
  • Diners Club
  • Discover
  • PayPal

Guaranteed safe & secure checkout

2 Years Warranty

  • Each 3156/3157 Red Led Bulb powered by 16 pcs high power 3030 led chips, low power consumption but high light output. HD glass lens for stronger light penetration
  • DC 9V to 18V wide-range voltage design, built-in constant intelligent IC driver, no digital and VHF radio signal interference. Aluminum circuit board, high effective heat dissipation
  • Plug and play easy installation,no polarity design, compatible for both standard and ck socket. Fit socket: 3156, 3056, 3356, 3456, 4156, 3047, 3157, 3157A, 3057, 3155, 3157NA, 3357, 3457, 3457A, 4057, 4114, 4157, etc
  • Brilliant Red Color. It can be used for brake light, tail light, turn signal blinkers, etc. The 50w 6ohm load resistor or flasher relay may be needed to prevent the hyper flash or the bulb does not blink for vehicles with built-in CANbus system
  • Detail
  • Review

3157 red brake light led bulbs

3157 red tail led bulbs

Features and Performance Details

Each 3157 Red Led bulb has 16pcs high power 3030 LED chips for perfect beam pattern, high light output but low consumption
Wide-range voltage and intelligent constant current IC driver to avoid digital and VHF radio signal interference
HD glass projector provides a stronger light penetration for better lighting experience
Heat-resistant Aluminum circuit board for better transfer efficiency. Solid alloy body for better heat dissipation and longer lifespan
No polarity design, and compatible for both standard and CK socket. Used for brake light, tail light, turn signal lights, etc
Comparable to OEM sized halogen bulbs and fit directly into sockets such as: 3156, 3056, 3356, 3456, 4156, 3047, 3157, 3157A, 3057, 3155, 3157NA, 3357, 3457, 3457A, 4057, 4114, 4157, etc
Important Note

Compatible with most vehicles. Some vehicles with a built-in canbus system might throw the error code. The 50w 6ohm load resistor or flasher relay may be needed to prevent the hyper flash or the bulb does not blink for vehicles with a built-in canbus system.

Customer Reviews

Based on 20 reviews
90%
(18)
5%
(1)
0%
(0)
0%
(0)
5%
(1)
C
Chad Poindexter
What is your vehicle's year, make and model : 2022 Ford F250 XLT
Direct replacement on 2022 F250

These were sent out to me as part of a review program from Auxito. My truck came with the halogen bulbs, but I was looking for an LED replacement, so I accepted their offer to try these bulbs. Things that were important to me when it came to replacing the halogen OEM bulbs was: 1) a direct replacement with no modifications necessary; 2) a bulb that was as bright, or preferably brighter than the stock bulb; and 3) that the bulb will last a long time. At this point, I can say that the Auxito bulb fit directly into the wiring harness without any necessary modification, and the bulbs are definitely brighter. Only time will tell if my third thing on the list is true or not. However, I will also give it points for looks. To me, I think it looks pretty good in the brake light housing even when it's not lit up. So for now, even though longevity has yet to be proven, I would rate this at 5 stars. And if anyone is looking to replace the halogen OEM brake light bulbs in their 2022 F250's, I would recommend these as a good choice.

M
Massengill Wade
What is your vehicle's year, make and model : 2022 Ford F-250 XLT
They are what I wanted

What I wanted was a direct replacement LED, meaning

1. No shaving the base
2. No FORscan settings need to be changed
3. No resistors or hyper flash issues.
4. No weird errors from the truck.

These LED tail/brake lights met all these requirements.

Please note these are tail/brake light LEDs only, no turn signals. And they are red, not white. The only tool you will need is an 8mm socket (or 5/16) The heatsink is well machined and big. It even looks spiffy when off and looking though the lens. The red light from the LEDs pass through the lens with out a lot of attenuation giving a deep red color that's pretty to look at. White LEDs produce a wide spectrum of light much of which is blocked by the lens, or the tail light appears orange or purple depending on if the white LED is truly white or leaning warm or cool.

Opinion:
In short, I think they are great. They have fewer LED chips than most/some solutions and that gave me pause, but having tried them they are plenty bright. Also I recalled my LED fog lights have only 6 LEDs and they are awesome bright.
The heat sink or frame of these things is massive. Well machined. They even look cool looking at them through the tail light lens.
The product packaging is sufficient, however I wasn't impressed with the shipping container (or lack thereof.) Auxito should have at least a padded envelope or small box to ship in. The LEDs are ruggedly made and so will survive any abuse the Post Office can dish out.

M
Morehouse7
What is your vehicle's year, make and model : 2017 Ford Super Duty F250 cclb
Quality units

Really well built, perfect fit. Really bright and consistent light. No hyperflash issues!!!

F
Franklin Aghassi
What is your vehicle's year, make and model : 2003 GMC Envoy/ 2008 Suzuki SX4 / 2007 Toyota Previa / BMW Z3/ etc etc etc Previa

I love Auxito LED lights, but only learned about them relatively lately and after years and dollars spent of having purchased many LEDs. Auxito seems to have engineered their replacement bulbs LEDs to function very well with the reflector bezels they were designed to work in. Their light output is typically maximized because light scatter is minimized (their headlights are Outstanding!!).
The lights I bought are for tail / brake functions; they are not only bright but the brake lighting is a whole other level of well directed light. LED replacement bulbs were supposed to be the Be All solution; and, for only moderate price, Auxito has absolutely delivered on those expectations. I am not a shill for Auxito; but I've suffered multiple disappointments in LED lighting for my cars--and motorcycles--over the years, and now this gearhead is finally just Sold.

C
Christopher StJohn
What is your vehicle's year, make and model : 2012 GMC 1500 Sierra 4x4

AUXITO 3156/3157 Red Led Bulb Brake Tail Light, 3056 3057 14-SMD 3030 Chipsets LED Bulbs

You recently viewed

Clear recently viewed