2005-2006 Acura RSX LED Bulbs Upgrade
2005-2006 Acura RSX LED Bulbs Upgrade
$20
OFF OVER $99
Code: AUX20
Guaranteed safe & secure checkout
$20
OFF OVER $99
Code: AUX20
Guaranteed safe & secure checkout
For you to drive your 2005-2006 Acura RSX in a safe and sane manner, you need proper visibility. The Whole kit comes with LED bulbs that vary in Lumen output for you to end up with just the right source of illumination to light up the road ahead of you.
Package Included:
High Beam: 9005 LED headlight Bulbs
Low Beam: H1 LED headlight Bulbs
Here is the installation video about the H1 LED headlight bulb, you can follow the video to install it. If you have any other questions, you can free feel to contact the customer service staff.
|
|
*The wiring adapters are included in the package for the H1 LED headlight bulb.
(you can finish replacing the H1 LED headlight bulb low beam in less than 10 minutes!)
1) Remove Battery Hold-Down Bolt from Radiator-support (Driver-Side) or lift Power-Steering Reservoir from its mounting Clip (Passenger-Side).
2) Move Battery or Reservoir toward motor to create room for your favorite hand.
3) Unplug Headlight Wire (Rectangular-Plug with two female-blade Sockets).
4) Remove Weather-Boot (~2.5” Dia Rubber cup with two Pull-Tabs).
5) Gently unhook Retainer-Clip Wire (Unhook and move Clip toward fender). Owner’s Manual has a good graphic to educate your fingers.
6) Rotate Blub from Headlight-Housing (Bulb + Socket with two male-blades).
7) Unplug Bulb from Bulb-Socket (Bulb with metal base one male-blade).
8) Check Bulb-Socket male-blades against female-sockets to make sure male-blades are not bent.
9) Obtain new AUXITO H1 LED Headlight Bulb (Do Not Touch Bulb-Glass with bare fingers. Skin-Oils become corrosive at bulb operating temperatures).
10) Plug new Bulb into Bulb-Socket. (Handle by Bulb-Socket Only)
11) Place new Bulb and Bulb-Socket back into Headlight-Housing.
12) Looking through front of Headlight-Housing lens, Rotate Bulb-Socket until two small holes in the metal base align with holes in Headlight Housing.
13) Re-Hook Retainer-Clip Wire across Bulb-Socket, securing it in the Headlight Housing.
14) Replace Weather Boot, seat it all the way onto the Headlight Housing.
15) Reattach Headlight Wire
16) Re-secure battery or Reservoir.
T15 Back-Up Light Bulbs:
7443 Brake/Tail Light Bulbs(2 piar):
For more videos on installing LED bulbs in the Acura RSX, click here
7443 Center High Mount Stop Light Bulbs:
7443 Front/Rear Turn Signal Light Bulbs:
|
|
T10 Front Side Marker Light Bulbs:
|
T10 Rear Side Marker Light Bulbs:
|
T10 License Plate/Trunk Light Bulbs:
|
31MM Map/Dome Light Bulbs:
|
If you need the other LED bulbs, please check the model user manual or contact us by mail at support@auxito.com
Looking for something else? Head to our homepage